I-Deck™762 Opp 3 in 1

  • Made up of 3 layers: Pre-painted metal sheet, EPE foam and Aluminium Foil.
  • Opp 3 in 1 can be customised into Standard, Semi and Special Curve.

Benefits

  • Simple installation thus time-saving
  • Heat-resistant thus reducing electricity cost
  • Provides mild sound insulation thus a peaceful and comfortable environment
Category:

Specification Drawing

Specification Info

Profile I-Deck™762 Opp 3 in 1
Effective Width 762mm
Depth of Rib 25mm
Steel Standard AS 2728 (Color) – Equivalent to Malaysia Standard MS 2383
AS 1397 (Bare) – Equivalent to Malaysia Standard MS 1196
Yield Strength (Mpa) G300/G550
Minimum Roof Pitch 3° Sheet without end lap
Tolerance Length ±5mm, Width ±3mm, Thickness ±0.03mm

Thickness Available

Coating Mass Base Metal Thickness (BMT) Total Coated Thickness (TCT) Weight (Kg/m2) Min Yield Strength (Mpa)
AZ 090 0.20mm 0.25mm 1.99 Min G300/G550 MPa
AZ 090 0.25mm 0.30mm 2.46 Min G300/G550 MPa
AZ 090 0.30mm 0.35mm 2.93 Min G300/G550 MPa
AZ 090 0.35mm 0.40mm 3.4 Min G300/G550 MPa
AZ 090 0.40mm *0.47mm 3.88 Min G300/G550 MPa
AZ 100 0.42mm 0.47mm 4.14 Min G300/G550 MPa
AZ 100 0.48mm 0.53mm 4.7 Min G300/G550 MPa

*nTCT (Nominal Total Coated Thickness)

Recommended Maximum Roof Length (G550/M)

Rainfall Intensity (mm/hour)Slop in Degree 3°Slop in Degree 5°Slop in Degree 7°
150506080
200395060
250304048
300263040

Recommended Maximum Spacing of Supports

Coating Mass Base Metal Thickness (BMT) Total Coated Thickness (TCT) Roof End Span (mm) Roof Internal Span (mm) Wall End Span (mm) Wall Internal Span (mm)
AZ 090 0.35mm 0.40mm 900 1000 1200 1500
AZ 090 0.40mm 0.45mm 1050 1300 1500 1800
AZ 100 0.42mm 0.47mm 1200 1500 1700 2000
AZ 100 0.48mm 0.53mm 1300 1700 2000 2300